W3005 Digital Hygrometer for Incubator LED Humidity Controller Sensor Meter Detector Control Switch Hygrostat AC 220V DC 12V 24V

vibration sensorAmmetersW3005 Digital Hygrometer For Incubator LED Humidity Controller Sensor Meter Detector Control Switch Hygrostat AC 220V DC 12V 24VDescription:Model: XH-W3005Humidity Range: 00%99%RHHumidity Control Accuracy: 0.1% RHMeasurement Accuracy: 2% RHLoad Power: 12v 120w or 24v 240w or 220v 1500w (depending on your choice)Output: Max10AOutput Type: Direct outputSensor length: 1mSize: 60* 45 * 31 mmPacking List:1x Humidity Controller + 1x SensorDetecting HumidityUp ButtonDown ButtonOutput IndicatorItem No.Instructions:Connect to power supply diplay indicating humidity. A. Set the starting humidity: Press the Up button once to show the starting humidity;Long push the Up button more than 3 seconds until the reading flashing then push the Up or Down button to set the Starting Humidity Value.B. Set stop humidity: Press the Down button once to show the stop humidity;Long push the Down button more than 3 seconds until the reading flashing then push the Up or Down button to set the Stop Humidity Value.C. Reset: When the power is on long press the Up and Down button at the same time for 3 seconds. The reading shows 888 and then the controller automatically jumps to the detected humidity.Wiring WayNote:1. 12V/24VDC W3005 can use the transformer or 12V/24V DC Power Supply.2. W3005 is Direct Output: The output and input voltage are synchronized.When the humidity controller is working ( the indicator light is on) the output voltage is the same as input voltage;When the humidity controller is off (the indicator light is off) the output will do not have voltage.